It wasn’t intended to be used with reloaded cartridges.Īs the piece fires, the forward neck expands and fits into the chamber tightly. Brass stretches quite a bit with the Lee-Enfield rifle, as one example. One reason military cartridge primers are crimped in place versus the usual civilian pressure fit is to prevent tying up a gun with excess headspace, as it would allow the primer to back out. This is the space where the cartridge case rim fits when the rifle is loaded. Headspace is simply the difference between the front of the bolt and the back of the barrel. Headspace is a concern, and all rifles should be checked for proper headspace. ![]() The Lee-Enfield fits the raceway a little differently. The Mauser/Springfield type is easily removed, and the fieldstrip sequence to replace an extractor or firing-pin spring is easy enough. ![]() The screw holding the front sight shroud on the Lee-Enfield seldom works loose and may have taken a set and demand soaking before you are able to disassemble the rifle.Īnother concern is removing bolts from the action. Next is to learn to disassemble the rifle. ![]() Learn to properly load, fire, and cycle the rifle. The first thing we do is learn the manual of arms.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |